Cyclonic Separation Units
Cyclonic separation units remove mechanical impurities and liquid droplets from the gas to protect downstream process equipment and compressor station pipelines from damage and failure.
A unit consists of a separator, maintenance platforms, shutoff and regulating valves, and instruments.
A separator is a vertical cylindrical apparatus of a multi-cyclone type, which operating principle is based on the removal of mechanical and liquid impurities from gas streams through vortex separation.
For the convenience of maintenance operations, the separator has a manhole with a quick acting cover.
The discharge of separated liquid from the bottom part is automated. In order to prevent liquid from freezing, the bottom part is equipped with a heating coil.
The increase in capacity is achieved by the installation of several units of equipment operating in parallel.
Equipment is erected on an open site and can be used in different climatic zones.
Separator Units
Separator units serve to remove mechanical impurities and droplet liquid from associated petroleum gas, as well as to trap liquid flushes in the process network of compressor stations.
A unit consists of a separator, maintenance platforms, process pipelines with shutoff and safety valves, and instruments.
A separator is a horizontal cylindrical apparatus. Its operating principle is based on the removal of mechanical and liquid impurities from gas streams through inertia.
The discharge of separated liquid from the bottom part is automated. In order to prevent liquid freezing, the bottom part is equipped with a heating coil.
The increase in capacity is achieved by the installation of several units of equipment operating in parallel.
Equipment is erected on an open site and can be used in different climatic zones.
Gas Filter Separators
Gas filter separators serve to remove droplet liquid and particulates from the process gas in the APG compression process.
A unit consists of a separator, process pipelines with shutoff and regulating valves, and instruments located in a heated container.
A separator is a vertical apparatus with a split-flow or multi-cyclone type separator element in the top part of it. Its operating principle is based on the removal of mechanical and liquid impurities from gas streams through vortex separation.
Nipples are installed in the separator shell for the discharge of condensate and instruments hookup. The discharge of separated liquid from the bottom part is automated. In order to prevent liquid from freezing, the bottom part is equipped with a heating coil.
All equipment of the unit is mounted on a common skid and placed on an open site; it can be operated in different climatic zones. The design and technical parameters of an intermediate separation unit are calculated individually for each compressor station process flow.
